Denon AVR-X4300H 9.2 Channel Full 4K Ultra HD Network AV Receiver with HEOS


LOADING IMAGES
Denon AVR-X4300H 9.2 Channel Full 4K Ultra HD Network AV Receiver with HEOS
Not Ready to ship

No, this item is not in stock!

This item is no longer available.

Description

AVR-X4300H : 9.2 Channel Full 4K Ultra HD AV Receiver with built-in HEOS wireless technology, Dolby Atmos, DTS:X, HDCP2.2/HDR, MultEQ XT32 HDMI IN/Out, AL24 Plus

Powerful 9 Channel Discrete Amplifier with ECO Mode

The AVR-X4300H features a sophisticated power amplifier section with all 9 channels configured identically, employing discrete high current capable power transistors. Each channel is rated at 125 watts (8 ohms, 20 Hz - 20 kHz, THD 0.05%, 2ch driven) and all channels are able to safely drive lower impedance speakers (down to 4 ohms). Denon’s intelligent ECO mode adjusts power consumption according to signal level, and there’s an on-screen Eco Mode display that lets you see in real time how much energy ECO mode is saving. Most remarkably, the 9 channel amplification allows for setting up a 7.1.2 or 5.1.4 3D experience without the need of an external amplifier. By the use of an external amplifier the setup can get extended to 7.1.4 as the AVR-X4300H features 11.2channel processing. If not in use for 3D audio the integrated amplifiers can get assigned to drive another pair of speakers in a second audio zone running a different source than the main room.

HEOS wirelss multi-room music streaming, controlled by free HEOS app

Built-in HEOS technology allows the AVR-X4300H to become part of the HEOS wireless multi-room system, allowing you to enjoy your favorite music anywhere – and everywhere – around your home. Share music stored on your home network, Internet radio or streaming services with HEOS wireless speakers, or even other HEOS-capable receivers, throughout the house. And it’s all controlled by the free HEOS app, installed on as many smartphones and tablets as you like! The app gives you instant multi-room audio control, meaning you can command music in every room from any device: play different music from different sources in every room, group several rooms together and play the same song.

Built-in Bluetooth, and Wi-Fi

Featuring Bluetooth and Wi-Fi wireless streaming connectivity, the AVR-X4300H is equipped with an advanced dual antenna system for robust and error-free streaming even in congested urban environments. Connected to the Internet through your home Wi-Fi network (or with a hard-wired connection via the RJ-45 Ethernet LAN port), it allows you to enjoy your favourite tracks from streaming music services such as Pandora, Spotify Connect, Deezer, Tidal and many more using the free HEOS App. You can also choose from thousands of Internet radio stations from around the world, and enjoy music and speech entertaiment of virtually every genre. AirPlay lets you play your favourite tracks wirelessly from your iPod touch, iPhone or iPad, and via network streaming you can listen to music files stored on your home PC or Mac, or NAS devices in standard resolution, but as well in high resolution like FLAC or DSD. The all-new Denon 2016 AVR Remote App lets you control the AVR-X4300H with your smartphone or tablet: it’s available for Apple iOS, Android and for the Kindle Fire..

Dolby Atmos / DTS:X / AURO-3D

Now you can enjoy 3D sound at home with the AVR-X4300H, which features full flexibility in the speaker configuration to extend a standard 5.1 or 7.1 system by up to 4 additional overhead speakers or Dolby Atmos-certified elevation speaker for the ultimate home theatre experience. The maximum setup possible is 7.1.4 which do require an additional stereo amplifier. This unit supports both. This includes both Dolby Atmos and DTS:X new native 3D formats, as well as Dolby Surround and DTS Neural:X upmixing for existing content. And via a paid upgrade, the AVR-X4300H will also be able to playback Auro-3D sound or upmix your beloved movie collection with Auromatic.

Latest HDMI 2.0a Connectivity; HDCP 2.2 Compatible; ISF-Certified

Prepared for the future, with no fewer than eight HDMI inputs (including one conveniently located on the front panel) and triple HDMI outputs (out1, out2, zone output), the AVR-X4300H’s advanced video section features the latest HDMI specifications, including 4K Ultra HD 60Hz video, 4:4:4 Pure Color sub-sampling, High Dynamic Range (HDR) and 21:9 video, 3D, and BT.2020 pass-through support on every input. It also features HDCP 2.2 compatibility, a requirement for 4K Ultra HD copy-protected content, ensuring ready for the next generation of Blu-ray disc players, set-top boxes and other 4K Ultra HD sources. In addition, the video processor can also upscale all analogue and digital video to 4K Ultra HD. Certified by the Imaging Science Foundation, the AVR-X4300H features a full suite of video calibration controls (for use by an ISF technician), along with ISF Day and ISF Night video modes.

Most advanced Audyssey Room Correction Suite

Equipped with the full Audyssey Platinum suite of advanced DSP algorithms, the AVR-X4300H features Audyssey MultEQ XT32 automatic room acoustic correction. With the supplied measurement microphone, MultEQ XT32 analyzes each speaker’s output (including the subwoofers) at up to 8 measurement locations and generates precision digital filters that optimize each channel for the correct frequency and time domain response. Audyssey Low Frequency Containment uses advanced psychoacoustic algorithms to deliver a full range tonal balance, including deep bass, but without disturbing close-by neighbors or family members in other rooms, and features a multi-step adjustment that lets you dial in the amount of containment to your preference. Audyssey Sub EQ HT provides individual DSP tailoring of each subwoofer in a dual subwoofer setup, for deeper bass with improved definition, compared to a single subwoofer configuration.

HIGHLIGHTS

  • 9.2 channel AV Receiver with 125W per channel (8ohm, 20Hz - 20kHz with 0.05%THD), 11.2ch processing
  • Built-in WiFi with 2.4GHz/5GHz dual band support; built-in Bluetooth
  • 4K/60 Hz full-rate pass-through, 4:4:4 color resolution, HDR and BT.2020
  • 8 HDMI inputs (incl. 1 front) with full HDCP 2.2 support; 3 HDMI outputs
  • Advanced Video Processing with analog to HDMI conversion and full rate 4K Scaling
  • AirPlay, Bluetooth, Internet Radio, Spotify Connect, Pandora, SiriusXM, Napster, Amazon Music, TIDAL, Deezer and more
  • Dolby Atmos and DTS:X (up to 7.1.4 without add. 2ch amplifier); Auro-3D upgradable
  • Built-in HEOS Wireless Multi-Room Audio Technology
  • DSD (2.8/5.6MHz), FLAC, ALAC and WAV support
  • Audyssey MultEQ XT32 with SubEQ, LFC, Dynamic Volume, Dynamic EQ
  • Advanced Multi-Room options; 11.2ch Pre-out; RS232 Control

YOUR BENEFITS

  • 9 powerful amplifiers for an easy 3D audio setup to fill big rooms with Denon sound
  • Solid network connectivity especially in WiFi-crowded homes
  • Latest HDMI standard for future-proof compatibility
  • Plenty of inputs for your digital devices; different video in different rooms
  • Full HD and even Ultra HD video quality from existing DVDs or analogue sources
  • Unique 3D sound options with effects from overhead
  • Enjoy your music in your whole house with more HEOS products
  • Access to almost unlimited online music sources via free HEOS app
  • High Resolution audio streaming for HiFi enthusiasts even in Gapless
  • Delivering ultimate equalization for your individual room including subwoofer EQ
  • Audio and video in multiple rooms; ready for 3rd Party Home Automation systems

Technical information

  • Number of power amps: 9 (Front L/R, Center, Surround L/R,Surround Back L/R, Height 1 (Front wide/Height 2) L/R)
  • Power output: 235 watts per channel (Maximum Power Output Per Channel)
  • Speaker impedance: 4 - 16 ohms
  • Input sensitivity/impedance: 200 mV / 47 kohms
  • Frequency response: 10 Hz - 100 kHz — +1, –3 dB (DIRECT mode)
  • S/N Ratio: 100 dB (IHF-A weighted, DIRECT mode)
  • FM Tuning frequency range: 87.50MHz-107.90MHz
  • AM Tuning frequency range: 520 kHz-1710kHz
  • Power supply: AC 120 V, 60 Hz
  • Power consumption: 710 W (Standby 0.1 W, CEC standby 0.5 W)
  • Power consumption No-Sound: 55 W (ECO on), 85 W (ECO off)
  • Dimensions (W x H x D): 17.1 x 6.6 x 15.3 inches
  • Weight: 27.8 lbs.
  • HDMI (Front 1): x 8
  • Component (video): x 2
  • Composite (video) (Front1): x 4
  • Analog Audio: x 5
  • Phono: x 1
  • Digital Optical: x 2
  • Digital Coaxial: x 2
  • USB (front): x 1
  • Component: x 1
  • Composite Monitor: x 1
  • HDMI Monitor / Zone 2: x 2/x 1
  • Zone2/3 Preout: 2.0ch
  • Audio Preout (SW): 11.2ch
  • Phones: x 1
  • Ethernet: x 1
  • Microphone Port: x 1
  • FM/AM Tuner Antenna: x 1 / x 1
  • RS232 /12 V Trigger out: x 1/x 1

Numbers

  • UPC: 883795004008
  • EAN: 0883795004008
  • SKU: AVR-X4300H