Klipsch P-37-F-NTR Floorstanding Speaker - Natural
As the "smallest" floorstanding loudspeaker in our high-end luxury Palladium Series, the P-37F features the flagship P-39F's technology and gallery-like appearance in a slightly more compact but equally stunning package.
- Modern design, incomparable craftsmanship and proprietary technologies
- Exotic zebra-grain Linia wood veneer cabinet
- 0.75-inch horn-loaded tweeter, 4.5-inch midrange and triple 7-inch woofers
- Bass-reflex design via triple rear-firing ports
Introducing the P-37F floorstander, along with the entire Palladium Series, Klipsch has established new standards for visual impact and audio excellence. In fact, this premium speaker is a pinnacle of modern-day horn-loaded technology, letting you hear and emotionally connect with your music and movies precisely as the original artist or director intended.
The Speaker as Sculpture
Designed with an eye toward home interior and furniture designs, the P-37F has a signature style that blends classic Klipsch audio and a clean, contemporary look.
The floorstander's unique enclosure hints at the power and performance inside, while maintaining a high degree of sophistication and beauty. Next to its shape, the most striking visual statement is the exotic zebra-grain Linia veneer that's available in three different finishes: natural, merlot and espresso.
The horizontal linear grain and absence of visible fasteners allows the P-37F to elegantly complement your furniture and decor.
When in place, the two magnetically attached speaker grilles are designed to subtly reveal the classic Klipsch horn at the top and the hybrid drivers below; those who desire a more functional, powerful look may choose to remove them entirely to display the components. An adjustable brushed aluminum floating base supports the cabinet at just four points, rather than the entire area of the base. This raises the cabinet from floor level but maintains absolute stability.
A Legacy Reborn
Since 1946, Klipsch has been synonymous with horn-loaded technology. And since then, we've been guided by the four design principles set forth by our founder Paul W. Klipsch: high efficiency, low distortion, controlled directivity and wide and flat frequency response.
After just one listen, you'll discover the P-37F represents the latest advancement in horn technology and purest application of those design principles yet.
Unique to the Palladium Series is a carbon-infused, thermoset composite dual-horn configuration. It consists of a proprietary tweeter design, combining a chambered phase plug and Tractrix Horn for extended high-frequency response; a second 90° by 60° acoustically dampened Tractrix Horn is coupled to the midrange driver, resulting in remarkably precise and detailed performances.
For superior bass performance, the P-37F's three low-frequency drivers employ 7-inch hybrid cone woofers, powered by a unique three-part neodymium magnet structure with dual stabilizing rings that reduce nonlinear flux.
Three ports on the rear of the speaker enhance low-distortion bass response. Each woofer's voice coil responds accurately to the smallest signal modulation, yet can also handle the high power of the most demanding soundtracks.
Many speakers of similar caliber rely on off-the-shelf drivers; every P-37F driver has been engineered and built for their specific application. Years of research, development and testing resulted in a remarkable driver design that exceeds even our own high performance standards.
|Frequency Response:||43Hz-24kHz +/-3dB|
|High Frequency Extension:||30kHz|
|Low Frequency Extension:||31Hz|
|Sensitivity:||96dB @ 2.83V / 1m|
|Power Handling:||275W continuous / 1100W peak|
|Maximum Acoustic Output:||120dB (2 speakers in-room)|
|Nominal Impedance:||4 ohms|
|Recommended Amplifier Power:||50 - 600W|
|High Frequency Drivers:||0.75" (1.9cm) titanium diaphragm compression driver mated to 90 x 60 Tractrix Horn|
|Mid-frequency Drivers:||4.5" (11.4cm) aluminum diaphragm compression driver mated to 90 x 60 Tractrix Horn|
|Low Frequency Drivers:||Three 7" (17.8cm) high-output, aluminum / Rohacell / Kevlar hybrid cone woofers|
|Enclosure Material:||Constrained layer MDF (medium density fiberboard)|
|Enclosure Type:||Bass-reflex via triple rear-firing ports|
|Width:||9.75" (24.8cm) (12" / 30.5cm at the base)|
|Weight:||98 lbs (44.5kg)|
|Finishes:||Zebra-grain Linia veneer in a natural, merlot or espresso stain|