Klipsch R-5800-W

Creating a new benchmark in architectural audio excellence, the installer-friendly Klipsch R-5800-W in-wall loudspeaker delivers a level of realism and subtlety that surpasses and even intimidates competing designs. In fact, it snared a CES Innovations Award for being one of the best designed and engineered audio products for 2005.

Features

• Very high sensitivity and power handling
• Pivoting Tractrix Horn compression driver tweeter for clear sound in
• any location
• Treble and midbass attenuation switches and IR receiver knock out
• Single piece grille frame and rustproof aluminum grille

Detailed Description
By featuring an 8-inch Cerametallic woofer cone, a 1-inch titanium tweeter mated to a square 90-degree by 60-degree pivoting Tractrix Horn, as well as treble and bass contour switches, there's no denying this speaker's natural precision, clarity and efficiency. Not to mention, because the pivoting horn allows listeners to point the sound where they want it to go, the direct to reflected energy ratio is high in the listening area creating a large soundstage with well-defined imaging.

Available in a white finish, the R-5800-W can be paired with the Klipsch IK-800-W installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

R-5800-W Specifications

frequency response	40Hz-20kHz 3dB
power handling	50 w max continuous (200 w peak)
recommended amplifier power	100W
sensitivity	94dB @ 1 watt/1 meter
nominal impedance	8 ohms
crossover frequency	2600Hz
tweeter	1" (2.54cm) Titanium dome compression driver
woofer	8" (20.32cm) Cerametallic cone
enclosure material	ABS
enclosure type	Infinite baffle, front flush with wall
wire gauge accommodated	12 Gauge
dimensions	16.1" (40.89cm) x 10.6" (26.92cm)
cutout dimensions	14.75" (37.47cm) x 9.25" (23.50cm)
mounting depth	3.75" (9.5cm)
installation kit	IK-800-W
weight	7.9 lbs. (3.6 kg)
finishes	White
built from	2004

Klipsch CDT-5800-C

With integrated whole-house audio systems becoming more popular than ever, Klipsch designed the CDT-5800-C to meet the market's demand for a high-performance in-ceiling loudspeaker that easily challenges the inherent limitations of fixed locations.

Features

• High sensitivity and power handling
• Swiveling Tractrix Horn compression driver tweeter
• Treble and midbass attenuation switches
• Paintable to blend with ceiling

Detailed Description
Thanks to a new patent-pending gimbal mechanism, known as Controlled Dispersion Technology (CDT), both the high and low frequencies of the CDT-5800-C can be directed towards the listening area. Because the tweeter is independently adjustable from the woofer, this speaker offers even more precise localization.

The CDT-5800-C features a 1-inch titanium tweeter mated to a swiveling 100-degree Tractrix Horn. This swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. Additionally, a horn-loaded tweeter works well in instances where you want to point the sound to a specific location because it has more controlled directivity than a conventional dome tweeter.

The speaker's 8-inch Cerametallic woofer also has great positioning capabilities. It can rotate a full 360 degrees and then shift 15 degrees in any direction. This flexibility combined with the swiveling tweeter puts you in complete control of where the sound will go.

Other professional grade features, such as a premium network and treble and bass contour switches, help the CDT-5800-C establish a new benchmark in architectural audio excellence.

Available in a white finish, the paintable CDT-5800-C can be paired with a Klipsch IK-800-C installation kit (sold separately). This revolutionary kit design incorporates a mud ring, breakaway wire tie and color-coded brackets for easy speaker size identification. It also includes perforated metal wings that easily fasten to the studs via screws, staples or nails. Painted white for easy marking and placement, these metal wings can be folded around the edge of the studs if necessary.

CDT-5800-C Specifications

frequency response	49Hz-20kHz 3dB
power handling	50 watts (200 watts peak)
recommended amplifier power	100W
sensitivity	94dB @ 1 watt/1 meter
nominal impedance	8 ohms
crossover frequency	2230Hz
drive components	Two-way system using one 1" (2.5cm) titanium dome compression tweeter with a swiveling 100 Tractrix Horn and one 8" (20.3cm) pivoting aluminum cone woofer
fire rated enclosure	ME-800-C (sold separately)
enclosure type	ABS/ Infinite baffle, front flush with ceiling
wire gauge accommodated	12
width	11" (27.9cm)
cutout dimensions	9.8" (24.9cm)
mounting depth	5.4" (13.7cm)
installation kit	IK-800-C (sold separately)
weight	7.4 lbs. (3.4kg)
built from	2005

Klipsch R-5502-W

The R-5502-W in-wall speaker has what it takes to deliver compelling music and movie sound performances just as the artists and directors intended it simply does it without taking up any valuable floor or shelf space.

Features
Perfect for left, center or right channel use
Easily mounts horizontally or vertically
Horn-loaded for high efficiency and low distortion
Bass and treble switches, IR receiver knockouts
Maximum installation reliability
Mix and match with our 5000 series products

Detailed Description

The R-5502-W employs dual 5.25-inch Cerametallic woofer cones for fast, accurate sound with dynamic detail, while a titanium tweeter mated to a pivoting Tractrix Horn generates flat in-room frequency response with high efficiency and low distortion. The speakers precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced.

This in-wall speaker also consistently delivers thrilling, realistic sound, whether its installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any decor.

Bass and treble switches with custom EQ settings allow the speaker to be tailored to its environment, while IR receiver knockout holes allow for infrared repeaters, bringing custom configuration to installers.
Furthermore, the R-5502-W offers unlimited flexibility. It is timbre matched to all of our 5000 series architectural products, so you can mix and match to create a high-performance, discreet stereo or home theater system thats just right for you.

R-5502-W Specifications
frequency response 46Hz-20kHz +/-3dB
power handling 75W continuous / 300W peak
recommended amplifier power 130W
sensitivity 92dB @ 2.83V / 1m
nominal impedance 8 ohms compatible
high frequency drivers 1" (2.5cm) Titanium diaphragm compression driver mated to pivoting 90x 90 square Tractrix Horn
high freq crossover 2200Hz & 1300Hz
low frequency drivers Dual 5.25" (13.3cm) Cerametallic cone woofers
enclosure material ABS
enclosure type Infinite baffle, front flush with wall
dimensions 17.75" (45.1cm) H x 8" (20.3cm) W
mounting depth 3.5" (8.9cm)
cutout dimensions 16.5" (41.9cm) H x 6.5" (16.5cm) W
installation kit IK-502-W (sold seperately)
weight 6.5lbs (2.9kg)
finishes White paintable frame and grille
built from 2008

Premier Acoustic PA-120W

12" Active Subwoofer - 650 Watts Peak Power - 24HZ to 20KHZ - Auto On/Off - Adjustable Crossover - Cherry Or Black Finish.

A NEW REVIEW ON THE PREMIER ACOUSTIC LINE! The newest review (7 very detailed pages) is from HOMETHEATERFOCUS.COM. They state, "this system compares in quality and build to other systems costing twice as much." Click here to read the full review! READ THE REVIEW FROM HOMETHEATERFORUM.COM! The PremierAcoustic Speaker System is reviewed and given a "Highly Recommend" ranking. The review states, "It didn't matter what I threw at them they handled all the dynamics of the music without coloring it in any way. In many cases I could swear that I was hearing additional bits of music and dialogue that I hadn't heard before." Click here to read the entire review!

First lets take a good look at the speaker above. Click each thumbnail image to show a larger image of the speaker. Now lets super size it. Click the larger image to bring up an even larger, cleaner picture. Now that you can see what you are looking at, lets talk about it. Powered Subwoofers are designed to bring out the low end bass response found in DVD movies or music. Huge explosions, dinosaurs walking or just bass guitar and drums, the PA-120W is designed to reproduce these sounds perfectly. The alignment of a large 12" polygraphite woofer, and a built in 650 watt amp makes this sub fill any room with powerful clear bass. We have given you even more control over the way you tune your subwoofer. An adjustable crossover to custom set the frequency response, a volume control to set the output and an auto on/off switch to power on the PA- 120W as soon as that bass hits your sound track. All these features make the PA-12W one of the strongest powered subwoofers on the market today. It is available in two stunning colors black or cherry.

Specifications:

12" Active Subwoofer

Sensitivity: 85DB 1 Watt 1 Meter

Ohms: :8 Ohms

Frequency Responses: 24HZ-20KHZ span>

Wattage: 200- 650 Watts

Size: 19" x 14" x 19" (H X W X D )

Weight: 56 pounds each

Warranty: 5 year Warranty

Color: Cherry or Black